NIPPEN now ISO 9001:2000 Certified Company.....Products tested by ERTL and IDEMI.....Approvals from DOT, M.S.E.B., EIL, PGCIL, CPWD Ministry of Defence, RDSO BSNL, MTNL, MECON Limited, Mitcon Consultancy, Electricity Boards.....Our product range includes Analog & Digital Meters, Digital Panel Meters, Ammeter, Voltmeter, Wattmeter, P.F.Meter, Frequency Meter, Phase Sequence Meter, KVA/KVAr/KWh Meter, Smart Load Manager, Transducer, Insulation Tester, Earth Tester, Shunt, C.T. etc.
 
  DIGITAL MULTIPARAMETER METER DT-36P
 
 
Digital DT-36P features Active Power and P.F. combined in a single display page. It gives phasewise and total or system vialues with the use of or buttons located on the front panel. The microcontroller based circuitry gives highly precise, reliable and true RMS readings.
 

:: FEATURES
 
• True RMS computation.
• Measures active power phase wise and total
• Power factor per phase and system P.F.
• Auto scalling into Kilo, Mega and Giga and deciman shift.
• CT ratio programmable at site.
• Direct reading without M.F.
• Aux Supply : 230V OR 110V
• Auto scrolling function for parameter view
• Star and delta conversion
• Very low CT burden.
• 2 line display of 4 crisp and super bright digits of 14.2 mm. height
• Lag and lead P.Fs is indicated by individual LEDs.
 

:: SPECIFICATIONS
 
TECHNICAL SPECIFICATIONS
System
:
 3Ph 4W / 3Ph 3W / 1Ph 2 W
Wide Input Volages
:
 75-500V AC
Inpute Current
:
 5A or 1A
Accuracy
:
 ± 1.0% for power and.02 for PF
Aux. Supply
:
 230 or 110V ±10% AC
Frequency
:
 45-65 Hz
Continuous Overload
:
 1.2 x Rated Voltage
2 x Rated Current
Dielectric Streneth
:
 2kV AC for 1 min.
Maximum Overload
:
 Voltage 1.2 times rated continuous
Current 2 times rated continuous
     
MECHANICAL SPECIFICATIONS
Dimention
:
 96 x 96 x 80 mm (Depth)
96 x 48 x 82 mm (Depth)
Cut out
:
 91 x 91 mm
91 x 44 mm
Protection
:
 IP 54 (Front option) IP 20 Terminal Block
Mounting
:
 Wedge clamps
Casing
:
 F.G. Ploycarbonate (UL-94VO)
     
MEASUREMENT
kW
:
 Phase wise and total system
PF
:
 Phase wise and system
     
ENVIRONMENT
Ambient
:
 -10° C to 55° C
Storage
:
 -20° C to 70° C
Humidity
:
 <95% RH Non Condensing
     
KEY PAD
2 Keys for scrolling trough display pages for system values & auto scrolling
     
APPLICATION
Gensets
Power distribution / Control Panels
AMF Panels
Q.C. Testing
 
ENERG.MGT.SYS
Energy Mgt. System